Lumenier - Micro LUX F4 + FrSky SBUS Receiver

The Lumenier Micro LUX F4 is a 20mm square mountable flight controller with integrated FrSky SBUS receiver. Designed for micro FPV brushless builds. The board supports Betaflight and D-Shot by combining it with an AIO ESC. Attached to the board is a low latency radio receiver with a single antenna. The board is plug and play compatible with Lumenier 4-in-1 ESC's like the 10A BLHeli_S Opto or the 2-in-1 20A BLHeli_S Opto.

Included

• 1x Lumenier MICRO Lux F4
• 1x 8CH SBUS FrSky compatible onboard receiver (pre-soldered)
• 8x Anti-Vibration Mounting Rings
• 2x ESC Input cables

Specifications:

• STM32F405  32-bit processor with 1mb flash memory
• ICM-20608-G SPI Gyro/Accelerometer
• 1.6mm PCB
• Micro USB connector
• 8CH SBUS FrSky D8 Mode Radio Receiver supporting SBUS and PPM
• 2-4S Direct Lipo battery support (5-16v)
• Onboard 5v/2A and 3.3v/0.2A regulators
• RGB LED dedicated pad and support
• 3x UART Ports
• Betaflight support with DShot Support
• BLHeli passthrough flashing supported by hardware
• Dimensions: 27 x 27 x 6mm (including USB in height, 8mm tall with radio receiver board)
• Mounting Holes: 20 x 20 mm square to center of holes.
• Weight: 4.3g