Lumenier - 4 Power+ Plus

The 4Power Plus PDB from Lumenier is a 30.5mm square mounted board. It features a convenient layout for soldering with 3-6s LiPo Support. ESC connection pads are located on the corners of the board. The main power lead is a small tab with an included XT60 connector which can be soldered on flat. There are BEC regulated 5 and 10v outputs with a 184A current sensor.

Included

• 1x Lumenier 4Power + Plus Power Distribtuion Board
• 1x Lay-Flat XT60 power connector
• 1x Set of Nylon standoffs
  • 4x M3 6mm hex standoff
  • 4x M3x12mm screws
  • 4x M3 hex nuts

Specifications:

• Input voltage range (3S-6S operation): 8 - 26VDC
• PDB: 4x30A (Max.4x46A)
• Regulated 5V (1.5A) and 10V (1.5A) outputs
• Current Sensor 184A
• Dimensions: 46x36x4mm, Weight: 8.5g
• Mounting: 30.5mm square spacing,
• Continuous current: 30A per output Peak current (10 seconds/minute): 46A Max per output